Mini-Z RACE TRACK IN FUQUAY VARINA

• Any wheelbase 98 to 102mm, Kyosho mr01, mr02, mr03, or PN 2.5 chassis only.
• Body
  • Silver Horse hard bodies, Kyosho Autoscale Hard Bodies, GL Hard bodies, or Jomurema GT01 body only, no lexan bodies, no XVR (thick lexan).  
  • Lexan windows and roof allowed.  Aftermarket wings allowed as long as they fit in the 80x45 Stock Wing Template.  Front Light covers must be installed.  No body trimming other than minimal grinding for clearance issues. LM Body can only be run on a 102mm wheel base only.
• Motor Options:
  • Kyosho X-speed Motor-V Black end ball motor OR
  • PN 70 Turn (bushing or bearing) OR
  • PN 50 Turn (bushing or bearing)
  • NO WHITE STOCK MOTORS, Motor cans can NOT be opened on any motor, no modified armatures or rotors.  Brushes and Wires can be changed on motors that allow servicing without taking the end bell off.  Thermal cut off and/or capacitors may be removed.   If it appears the end bell has been removed it will be DQ’ed
• Gears: 
  • Open gearing
• Weight:
  • No Weight Restriction
• ESC:
  • Any Kyosho board allowed.
  • No modifications to electronics, no replaced or stacked fetts.
• Power Source:  
  • AAA NiMH batteries only 750mah or more.  Cars must be powered by four AAA batteries. Alkaline, Ni-MH or Ni-Cd batteries may be used. No other type of battery may be used. For example: Lithium Polymer may not be used. Additional battery for transponder allowed.
• Wheels/Tires: 

All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width is 8.5mm. Maximum wheel diameter is 20mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

• Chassis:  
  • Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, Jomurema, GL Racing GLR, GLR-GT, MRC MR01, PNR2.5W & 3.0, RTRC RTA, Atomic MRZ, NEXX Skyline, Spectre, Reflex Racing RX28 GT Body 90mm-102mm wheel base only
• Body: 
  • Kyosho Autoscale Hard Bodies, Silver Horse hard bodies, or Jomurema GT01 body only, no lexan bodies.  Lexan windows and roof allowed.  Aftermarket wings allowed as long as they fit in the 80x45 Stock Wing Template.  Front Light covers must be installed.  No body trimming other than minimal grinding for clearance issues. LM Body can only be run on a 102mm wheelbase only.  
• Motor:
  • Any brand 2500kv brushless motor (sensored or non-sensored, max KV 2800)
  • Max can diameter is 16mm, No option or aftermarket rotors are allowed.
• Gears: 
  • Fixed Gear ratio 64 Pitch
    • 14 Pinion (#416414 or #426414 or MR2714WC Brown or pinion clearly marked)
    • 53T Spur Gear (#MR2953WC Yellow or #MR2055-T53WC Yellow or clearly marked on spur) ONLY
• Weight:
  • Minimum Weight 160g
• ESC: 
  • OPEN any Sensored or Sensorless ESC.
• Power Source: 
  • 2S Li-Po battery maximum 8.4 volt (checked with multimeter)
• Option Parts: 
  • Any aftermarket brand Mini-Z production parts allowed.
• Wheel: 

All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width is 8.5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

• Chassis: 
  • Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, Jomurema, GL Racing GLR, GLR-GT, MRC MR01, PNR2.5W and 3.0, RTRC RTA, Atomic MRZ, NEXX Skyline, Spectre, Reflex Racing RX28 GT, MWX R1. 98mm wheelbase only.   Other Chassis may be allowed, check with the Race Director.
• Body: 
  • Lexan Sedan or Lexan Pan body only. NO hard bodies.  XVR acceptable if mounted with body posts.  Sedan Wings must fit the 82x50 Open Wing Template.
• Motor:
  • Any manufacturer motor is allowed, sensored or sensorless.
  • Max can diameter is 16mm.
• Weight:
  • No Minimum Weight
• ESC: 
  • OPEN any Sensored or Sensorless ESC.
• Battery: 
  • 2S Li-Po battery maximum 8.4 volt 
• Option Parts: 
  • Any aftermarket brand Mini-Z production parts allowed.